Complete ND Graffiti Protect Program™ Instructions Are In this article
The substrate needs to be 1st primed with 1 COAT™ Drinking water Centered Primer/Sealer/Finish in enough amount so that it is noticeable and will be felt within the surface. Just after it’s dry to your contact apply ND GRAFFITI SHIELD™ by spray (airless sprayer with 0.015 or 0.013 suggestion at about three hundred-five hundred PSI is usually recommended for most huge painted and all porous surfaces; very low tension hand pump sprayer at about 35 PSI might be utilised on incredibly porous surfaces). The applying ought to be skinny and ND GRAFFITI Defend™ need to show up h2o apparent when used. THE GRAFFITI Protect SYSTEM™ is a total of 4 separate coats of ND GRAFFITI SHIELD™ over the base software of 1 COAT™. Every single coat need to be dry to your contact in advance of future coat is used. Drying time may perhaps differ involving jiffy to an hour or so dependent upon the climate, humidity and ventilation. Graffiti Shield
THE GRAFFITI SHIELD Method™ needs to be employed soon after 96 hours that is the cure time. You are able to protect the wall while it is curing by masking it by using a fall cloth or securing the region. Should really cleansing be required prior to ninety six hrs, reapply ND GRAFFITI Protect™ to your necessary areas only. Never let this item to freeze and don’t use it in freezing temperatures. However, the moment it really is used and cured, freeze/thaw cycles could have no impact on suitable item general performance. No Slip Floor Coat
Take away new graffiti from THE GRAFFITI Defend SYSTEM™ in 24 hrs or fewer for far better success. Use our DISAPPEAR Organic and natural Graffiti/Adhesive Remover™ – apply to location and permit it to soak on graffiti for five minutes to about 15 minutes and flush with drinking water, clean up using a smooth cloth, or powerwash the realm. When important, contact up cleaned locations with a light-weight coat of ND GRAFFITI Protect™. Graffiti Remover
Please examination this product or service on a little inconspicuous region ahead of continuing with the work.